Moto Alliance Denali Yamaha Rhino Standard Series UTV Snow Plow Kit

DENALI Standard Series ATV/UTV Snow Plows are made to handle the toughest conditions including sand, snow, and ice. The "Easy-Connect" design created by MotoAlliance engineers makes attaching and detaching the plow an extremely easy process. This Center Mounted plow disperses the force of impact to the sturdiest part of the UTV / SxS, preventing damage to the front end or other vehicle parts from sudden impact.

Please Note: all DENALI UTV Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend a VIPER Elite, Max or Midnight winch with an automatic brake.

Kit Contents:

• UTV Snow Plow Blade - Straight
• Pushtubes
• Two (2) Wearbars
• Skid Feet
• Installation Hardware and Instructions

• Snow Plow Blade (19 inches scoop) and leading horizontal supports are formed from a single piece of 11 gauge steel
• Four 7 gauge ribs run the full height of the blade
• Three additional 7 gauge horizontal stabilizers support the deepest point of the blade
• 65° attack angle and over center design ensures snow rolls up and is thrown forward
• Two (2), Replaceable 7gauge steel wear bars included with every kit
• Height and angle adjustable skid feet included
• 3 Year Warranty

• Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
• Turn system allows you to easily position your plow in 5 different angles - 0, 12.5°, 25°
• Simple detachment system with the pull of a pin
• Structural tube steel cross bar for added lateral rigidity
• Quick Release Pins included
• Extended Push Tubes are designed to be used with SxS/UTVs that have tracks

• Top of the line Parker hydraulics system with built in relief valve overload protection
• Hydraulic system is completely sealed for life, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid
• Change the blade angle while driving; full radius turn in just 5 seconds
• Heavy duty chrome plated ¾″ cylinder shaft
• No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes
• Wire harness utilizes weatherproof connectors

• Roller
  • Replaces the winch fairlead during the plow season
  • For use with Steel AND Synthetic cables
  • Curved cable groove helps eliminate flattening and breaking of cable
  • Bolt Patterns:
  • Standard Spool: 3″ x 4.875″
  • Wide Spool: 3″ x 6.67″
• Sheave
  • Includes pulley, 1/4″ clevis hook and nylon strap
  • Allows greater precision when raising/lowering plow blade and increases the angle of pull
• Cable
  • 12′ length, 1/4″ diameter
  • Single braid, dyneema rope with galvanized steel thimble/eyele

Fitment

2006-2011 Yamaha Rhino 450
2004-2008 Yamaha Rhino 660
2008-2013 Yamaha Rhino 700